yes i know it can be dangerous in case of malfunction - what i meant
was just to figure out if a ground loop is the cause of problems.
jure
On 2/1/07, Niels Ott <niels.ott@web.de> wrote:
> jure zitnik schrieb:
> > you can try isolating the ground pins on the power connector (a piece
> > of tape does it)
>
> Do not follow this hint.
>
> There are good reasons for the ground pins being where they are and in
> case of a heavy malfunction it might be the person using the device that
> serves as a conductor instead of the ground pins.
>
> This becomes even less funny when high voltage is conducted by audio
> cables that are connected to other gear that is touched directly by
> musicians, like e-guitar strings, microphones, etc.
>
> Niels
>
>
> PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
> Yahoo! Groups Links
>
>
>
>