nanomole39 schrieb:
> hiya iv just tried loading the sounds back in,but cant get it to load
> or even the found led to come on.unless i have a fault there too.i
> was using a wav from my laptop and fed that into the tape socket,ahh
> well didnt think it was gonna be easy! :O(
Hm yeah this can be difficult. For my Juno 106 (Roland) I have a very
old backup holding the original presets (well almost) which I can only
reload when I twiddle around with some equalizer.
Nevertheless, Gil is right, in manual mode it should work.
You need to figure out whether the CPU is working or not.
I only own a Trident MK2 but before I fixed it, the CPU seemed to crash:
Several presets were activated at the same time according to the LEDs
and the sounds were nothing more but noise.
In the Trident playing seems to be independent from controlling. This
means that apparently the synthesizer gets used by the keyboard
controller CPU but it does not produce any useful sounds because the
main CPU doesn't set the parameters right.
One way to see that the main CPU has crashed is when it doesn't react
when you select a program or switch to manual mode.
Apart from that: Check in the manual mode again by setting a simple
sound manually.
Niels
>
> --- In PolySix@yahoogroups.com, Niels Ott <niels.ott@...> wrote:
>> You do lose all stored sounds when the battery is removed. Having no
>> sounds can sound as you describe. B-)
>>
>> So reload your sounds into the Synth and check again.
>>
>> Niels
>>
>> nanomole39 schrieb:
>>> --- In PolySix@yahoogroups.com, "gil_we" <gil_we@> wrote:
>>> Hiya,no just the hum no matter what keys/buttons i press.does
> reloading
>>> the sounds make a difference?,or should i be able to hear
> something by
>>> pressing the manual button?.could i connect to the output of the
> vca to
>>> check if there is actually any sound,as maybe the output side of
> things
>>> is faulty.....is this common ?
>>>
>>> thanks
>>>
>>> Ady
>>>
>>>> When you click the Manual button and start fiddling with the
>>> settings -
>>>> do you hear anything ?
>>>>
>>>>
>>>> --- In PolySix@yahoogroups.com, "nanomole39" <nanomole39@> wrote:
>>>>> hi everyone i have a korg ploysix background unknown but the
>>> battery
>>>>> has been replaced and the boards seem to be working(leds
> lit).but
>>>> when
>>>>> i connect headphones or amp to output all i get is a faint
> hum,and
>>> no
>>>>> sound regardless of which keys or presets i select.is this a
> common
>>>>> fault ?.thanks any pointers in the right direction would be
> great.
>>>
>>>
>>>
>>> PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
>>> Yahoo! Groups Links
>>>
>>>
>>>
>>>
>
>
>
>
> PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
> Yahoo! Groups Links
>
>
>
>