peter_vh01 wrote:
> I am hoping that someone can explain to me how to properly remove the
> wire connectors from the boards inside the polysix. They are
> apparently glued quite together quite strongly. I have tried
> cutting/cracking the glue, but have only yet been able to pull out one
> of the connectors.
Make use of a good knife, like a box cutter or scalpel. And then
carefully cut the glue.
At least this worked for other devices I was digging around in. My
Trident doesn't have glued connectors.
Niels
--
http://www.drni.de/niels/