depending on which pin it is, you may get trouble selecting some parameters
like switches (octave, wave etc.) and baks, presets, and "write" and "write
enable" too.
So yes, it may be the reason.
Basicaly majority of faults in synths comes from flaky connectors. P6 is
exception here - it's designed to have the battery leakage.
Roman
----- Original Message -----
From: "sputnik979" <sputnik979@yahoo.com>
To: <PolySix@yahoogroups.com>
Sent: Tuesday, July 25, 2006 3:23 PM
Subject: [PolySix] Re: Memory failure, S-RAM suspected.
> It's me again. I found a tiny little dot of acid on one of those points
> in CN06 connector. This is the area where the upper boards of
> controls&knobs are connected to the main cpu board as you know. Could
> that be the culprit of my memory problem ? Maybe 'Write Enable' track
> goes through one of these points ? See picture:
> [ http://img95.imageshack.us/my.php?image=poly6boardij0.jpg ]
>
>
>
>
>
>
>
> PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
> Yahoo! Groups Links
>
>
>
>
>
>
>