You know, I got those backwards. The low end is flat and the high end is
sharp.
On 4/25/06, Sam Larch <sdlarch@gmail.com> wrote:
>
> You mean VR 10 instead of 12, right?
>
> It's like I don't have enough throw in the pots. The most logical
> approach I see is that I would center all VRs 1, 3, 10, 11, & 15 - and then
> use vr15 to center C3. With these settings, C1 is way (+200 cents) sharp,
> and C6 is way (-200 cents) flat. I can't swing tune high and low far enough
> apart to get the complete range in tune.
>
> What damage could be caused by adding resistance to the pots (high and
> low) to get more swing out of them?
>
>
> On 4/24/06, gil_we <gil_we@yahoo.com> wrote:
> >
> > --- In PolySix@yahoogroups.com, "sdlarch1" <sdlarch@...> wrote:
> > >
> > > I am having a terrible time tuning my PolySix. I can get all 6 banks
> > > in tune with each other no problem.
> > >
> > > I cannot get C0, C3, and C6 in tune at the same time. To keep
> > > consistency, I checked each C on the same bank.
> > >
> > > I've been through the calib procedure to no avail.
> > >
> > > Can someone guide me to a potential point of failure?
> > >
> >
> >
> > Try to get only the first oscillator in tune first.
> > GENTLY take all SSM's out except of the first oscillator,a
> > and press the Unison key. Now you can hear sound with every note you
> > play.
> >
> > Use VR11, VR12, VR1, VR3, VR15 to get the scale perfect.
> > This is a lot of trial and error. Start with positioning them all to
> > the center. Use VR15 from time to time to correct to the right pitch of
> > A440 for example.
> >
> > Let me know how it works.
> >
> >
> >
> >
> >
> > PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
> >
> >
> > ------------------------------
> > YAHOO! GROUPS LINKS
> >
> >
> > - Visit your group "PolySix<http://groups.yahoo.com/group/PolySix>"
> > on the web.
> >
> > - To unsubscribe from this group, send an email to:
> > PolySix-unsubscribe@yahoogroups.com
> > <PolySix-unsubscribe@yahoogroups.com?subject=Unsubscribe>
> >
> > - Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> > Service <http://docs.yahoo.com/info/terms/>.
> >
> >
> > ------------------------------
> >
>
>
[Non-text portions of this message have been removed]