check the one made by spider labs
--- In PolySix@yahoogroups.com, "jure zitnik" <kokoon@...> wrote:
>
> i decided i'll etch the board myself. now - is there anyone that
could
> get me an already programmed PIC? or maybe point me to a good
(tested)
> schematic for a burner?
>
> what PICs are used in this project nowadays? can the PIC16F84 still
be bought?
>
> cheers,
> jure
>
> On 3/26/06, gil_we <gil_we@...> wrote:
> > Take into consideration that the components themselves cost about
25
> > $, not to mention the burning of the IC (I made two so far)
> >
> >
> > --- In PolySix@yahoogroups.com, "jure zitnik" <kokoon@> wrote:
> > >
> > > any chance to order just the board?
> > >
> > > On 3/23/06, cavernosum7 <klosmon@> wrote:
> > > > Hello-
> > > > Wanted to let everyone know that I've received a new batch of
MIDI
> > > > boards for the Polysix.
> > > > This is the SpiderRoom Labs MIDI; just a simple MIDI In in
Poly
> > mode,
> > > > channel selectable via Sysex command.
> > > > I'm offering them for $70 installed & tested.
> > > > Details at:
> > > > http://www.analogsynthservice.com/
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
> > > > Yahoo! Groups Links
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> >
> >
> >
> >
> >
> >
> > PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
>