A thousand thankyous , I'll let you know how it turns out.
Cheers
joe
-----Original Message-----
From: The Old Crow <
oldcrow@oldcrows.net>
To:
PolySix@yahoogroups.comSent: Fri, 23 Dec 2005 00:10:19 -0500
Subject: Re: [PolySix] Back to One
That sounds like the KLM-367 is resetting. Might want to adjust the
reset trimmer a little. The A-D, 1-8 LEDs (and other LEDs) should all
light up for about 1 second before setting to patch A-1.
If it sets to A1 too quickly, then the reset voltage adjustment is a bit
too 'edgy'.
Crow
/∗∗/
motionsandwaves wrote:
>I just recently had the battery replaced in my Polysix and had
>everything cleaned inside and out, the problem is that say if I'm one
>Bank C sound 2, after 15-20 minutes the sound reverts back to Bank A
>Sound 1. What do I do?
>
>Any help would be super groovey
>
>Thanks
>Joe
>
>
PolySix "Digiest" Page:
http://www.acc.umu.se/~amber/Poly6 Yahoo! Groups Links
[Non-text portions of this message have been removed]