Hello,
Every suggestion from everyone given to me (thanks) I have tried but
still no sound.
The problem seems to be in the 8048 processor on KLM367. The
outputsignal on pin 19 (DB7) has his pattern but some levels are
higher than + 5 volt, it looks like an open line (not terminated),
when I pull down it (10 k) it's gone but why??
So I'm thinking on replacing the processor and asking is this still
for sale somewhere (or replacement).
Please give me suggestions (where to buy).
Thanks,
Han.
--- In PolySix@yahoogroups.com, "FRANK SPANO" <fspa8724@m...> wrote:
>
> Thanks, I'll try that
>
>
> >From: "lnz2166" <lnz2166@y...>
> >Reply-To: PolySix@yahoogroups.com
> >To: PolySix@yahoogroups.com
> >Subject: [PolySix] Re: Polysix no sound
> >Date: Tue, 06 Dec 2005 06:59:25 -0000
> >
> >
> >
> >
> >
> >This might sound trivial but is your power supply output all in
> >
> >check. In addition have you checked the the solder pads on the
power
> >
> >connectors. I had and issue with one poly6 where the 15v solder
pad
> >
> >on the connector was lifted. Also do a sanity check and make sure
you
> >
> >chips are all getting proper voltages. Check old crows site for a
> >
> >scanned service manual.
> >
> >
> >
> >http://www.oldcrows.net/
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >--- In PolySix@yahoogroups.com, "FRANK SPANO" <fspa8724@m...>
wrote:
> >
> > >
> >
> > > I have a similar problem. Does anyone have a scanned service
manual
> >
> >I can
> >
> > > get emailed? Greatly appreciated
> >
> > >
> >
> > >
> >
> > > >From: "gil_we" <gil_we@y...>
> >
> > > >Reply-To: PolySix@yahoogroups.com
> >
> > > >To: PolySix@yahoogroups.com
> >
> > > >Subject: [PolySix] Re: Polysix no sound
> >
> > > >Date: Mon, 05 Dec 2005 08:56:38 -0000
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >I think the service manual have this information...
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >--- In PolySix@yahoogroups.com, "hansomchaam"
<hansomchaam@y...>
> >
> > > >
> >
> > > >wrote:
> >
> > > >
> >
> > > > >
> >
> > > >
> >
> > > > > Thanks for reply, I fixed the battery problem as described.
> >
> > > >
> >
> > > > > I checked (again) all connections/signals with an
oscilloscoop.
> >
> > > >
> >
> > > > > I don't see any output, also no gate signals when key-
stroke on
> >
> >ic5
> >
> > > >
> >
> > > > > KLM-366.
> >
> > > >
> >
> > > > > What shape must be on TP2 KLM367?
> >
> > > >
> >
> > > > > Thanks for your help.
> >
> > > >
> >
> > > > > Han
> >
> > > >
> >
> > > > > --- In PolySix@yahoogroups.com, "gil_we" <gil_we@y...>
wrote:
> >
> > > >
> >
> > > > > >
> >
> > > >
> >
> > > > > > How are the main voltages ? Has the battery leaked ?
> >
> > > >
> >
> > > > > >
> >
> > > >
> >
> > > > > >
> >
> > > >
> >
> > > > > > --- In PolySix@yahoogroups.com, "hansomchaam"
> >
> ><hansomchaam@y...>
> >
> > > >
> >
> > > > > > wrote:
> >
> > > >
> >
> > > > > > >
> >
> > > >
> >
> > > > > > > Hello,
> >
> > > >
> >
> > > > > > > Again here is a polysix with the "no sound at all"
problem.
> >
> > > >
> >
> > > > > > > When I measure with oscilloscoop on KLM366 (new) ic 9
pin 1
> >
> > > >
> >
> > > > > there
> >
> > > >
> >
> > > > > > is a
> >
> > > >
> >
> > > > > > > constant pattern but not a 0.5 V/oct. Keystrokes has no
> >
> >effect
> >
> > > >
> >
> > > > > at
> >
> > > >
> >
> > > > > > all,
> >
> > > >
> >
> > > > > > > processor 8049 gives signals on DB0..DB8. Also no
output on
> >
> > > >
> >
> > > >gate
> >
> > > >
> >
> > > > > > 0...3
> >
> > > >
> >
> > > > > > > = pin 15,10,7,2 ic 5 on keystroke.
> >
> > > >
> >
> > > > > > > Does anyone has suggestions.
> >
> > > >
> >
> > > > > > > Please help me, I look forward to hear the nice sound
again.
> >
> > > >
> >
> > > > > > > Thans,
> >
> > > >
> >
> > > > > > > Han.
> >
> > > >
> >
> > > > > > >
> >
> > > >
> >
> > > > > >
> >
> > > >
> >
> > > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > > YAHOO! GROUPS LINKS
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > > Visit your group "PolySix" on the web.
> >
> > > >
> >
> > > > To unsubscribe from this group, send an email to:
> >
> > > > PolySix-unsubscribe@yahoogroups.com
> >
> > > >
> >
> > > > Your use of Yahoo! Groups is subject to the Yahoo! Terms
of
> >
> >Service.
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > >
> >
> > >
_________________________________________________________________
> >
> > > FREE pop-up blocking with the new MSN Toolbar get it now!
> >
> > > http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/
> >
> > >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > YAHOO! GROUPS LINKS
> >
> >
> >
> >
> > Visit your group "PolySix" on the web.
> >
> > To unsubscribe from this group, send an email to:
> > PolySix-unsubscribe@yahoogroups.com
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
> _________________________________________________________________
> Is your PC infected? Get a FREE online computer virus scan from
McAfee®
> Security. http://clinic.mcafee.com/clinic/ibuy/campaign.asp?
cid=3963
>