SW1 turns off all of the filters I believe... so that way you're only hearing the VCOs..
----- Original Message -----
From: "Benjamin Wild" <wildjamin@gmx.de>
To: PolySix@yahoogroups.com
Subject: Re: [PolySix] can somebody comment on the procedur to calibrate a polysix
Date: Sat, 5 Nov 2005 10:03:36 +0100
>
> hello Johannes,
> thanks for replying.. I didn't mark my problems, so you just did a
> general comment..
>
> I'm used to tuning a ms20 via a mcv1, so I know the basic problematic..
> but as there seems to be not introduction in how the system works -
> the manual is very cryptic to me.
>
> what's the thing with SW1 ?
>
> > 4.7.1 Change circuit board slide switch (SW1) to opposite position
> > (away from VR1).
>
> maybe if I'd just follow each step, it will become clear - but most
> times something 'obvious' is missing..
>
>
> benjamin wild
>
>
>
> PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
> Yahoo! Groups Links
>
>
>
>
.sig
-Chromatest J. Pantsmaker
http://www.chromatest.net