Piezos cracked?
Definitely a possibility expecially if under a drum pad.
Possibly the pad needs to be a little thicker, and
maybe have a backing(another rubber pad) behind it.
i see so many piezos with the wire detached.
everyone tries to "solder" it back on..heh heh
you know, even a little piece of piezo material will
generate a voltage. BTW, it's crystal not ceramic.
it's a property of crystals to generate a voltage when struck.
crystals can also be cut to resonate.
if U still have a piece of piezo on brass, take a wire, tin it
with solder then flatten it with a hammer. Superglue or
epoxy this flat conductor to the top of the piezo material.
U should be able to tap it with your finger and see a spike
on a scope. the brass is the gnd for your probe.
do like Mic Fleetwood did.
put a bunch of sensors in a shirt and play MIDI drums on your chest.
afn
tb
--- In oldsynths@yahoogroups.com, "ascii_me" <rmcdonald@w...> wrote:
> Piezo material is usually a ceramic (or crystal), so while it
doesnt
> technically "deterioate", lots of vibrations over time could cause
> the piezo to become chipped or detached from the brass they were
> mounted on.
> Rory McDonald
> Oldsynths Moderator
>
> --- In oldsynths@yahoogroups.com, sasami@h... wrote:
> > tb22 wrote:
> >
> > >Rubber 'does" deterioate.(maybe just needs cleaning)
> > >Piezo does not.(can crack, though)
> >
> > You don't say. I have a couple of drum things here that use piezo
> sensors.
> > Now they are just little brass disks - 90% of the piezo material
> has been
> > bashed off. And yes, these were mounted UNDER the pads.
> >
> > Ken
> >
>
______________________________________________________________________
> _
> > Ken Stone sasami@h...
> > Modular Synth PCBs for sale
<http://www.blaze.net.au/~sasami/synth/>
> > Australian Miniature Horses & Ponies
> <http://www.blaze.net.au/~sasami/>