Archive of the former Yahoo!Groups mailing list: OldSynths

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [oldsynths] Re: PAiA 4700 (introduction..)

From: Al Thompson <biggles58@...>
Date: 2006-08-06

I think they are the same size as those used on many multimeters.  I'd pull one out and take it to your local electronics supply place.  You'll at least find out what they are, then you can call Mouser or one of those discount places and give them a part number they can reference.
 

 


----- Original Message ----
From: Clay Ruby <clayruby@...>
To: oldsynths@yahoogroups.com
Sent: Saturday, August 5, 2006 12:36:10 PM
Subject: Re: [oldsynths] Re: PAiA 4700 (introduction..)


The 4700 (like the 2700 which was my first synth back in '74) uses
1/8" mono patch cords for audio and very thin needle/bayonet patch
cords for all voltage control signals.





Thanks, Jim. I would be happy to post some sound samples as soon as it starts to sing.
As for the needle/bayonet patch cords, I was able to find something called Pin Tip Plug
here at http://www.pomonaelectronics.com  
Would these work? I was looking for the actual parts on Mouser, not sure if I found the right one, though.
Thank you! -=clay

 
 
Check out the first Lateral Force CD at:

http://cdbaby.com/cd/lateralforce

Watch for the latest one this summer!