Sounds like bad rubber bushings. Check out:
http://pw2.netcom.com/~arcsound/There was another supplier (Highspies, quite a bit cheaper that arcsound)
but they had a limited run and are now out of stock.
Replace the bushings on your old P-R keyboards and it's a world of
difference. The process is quite easy.
mw
-----Original Message-----
From: Clive [mailto:
analogue@...]
Sent: Saturday, October 09, 2004 9:48 AM
To:
oldsynths@yahoogroups.comSubject: [oldsynths] Noisy Rogue
Afternoon everyone,
I have been the proud owner of a Moog Rogue for more than 20 years,
since I started putting a modular synth together I have used it much
more (as a controller to start with).
The problem that I have is the keys make a heck of a clunk upon
depression and the same on release. If there is any kind of 'felt'
dampner I'm not suprised that it's worn out.
I wondered if anyone has had a similar experience with an old synth,
and maybe the correct way to approach the problem?
I'm not worried about taking the synth apart as I have done this many
times to clear the dust out.
Any ideas would be very much appreciated.
Take care now, and enjoy your weekend.
Clive.
Yahoo! Groups Links