Maybe a bad capacitor? synths that old often have leaky caps.
I am not a repair guy but something to check...
Rory McDonald
Oldsynths Moderator
On Jul 6, 2004, at 11:33 PM, oxygeno1313 wrote:
> Hi,
>
> I have a Roland SH-101, but the SQUARE wave output sounds very tiny
> compared with the SAW and SUB OSC output, i had the same problem with
> a SCI Pro-One long time ago, but that was only that was un-
> calibrated. I tought could be the same problem, but everything it's
> ok, the scale and tune are fine. I checkd the pin ouputs of the
> CEM3340 and seems to be fine, also i tested with other 3340's but
> nothing, anyone have a clue ?
>
> Thanks,
>
> Akira
>
>
>
>
>
>
> Yahoo! Groups Sponsor
>
> ADVERTISEMENT
> <122603_LREC_bkup_BR_Ashanti.jpg>
> <l.gif>
>
> Yahoo! Groups Links
>
> • To visit your group on the web, go to:
> http://groups.yahoo.com/group/oldsynths/
>
> • To unsubscribe from this group, send an email to:
> oldsynths-unsubscribe@yahoogroups.com
>
> • Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service.
>
>