Archive of the former Yahoo!Groups mailing list: The Mellotron Group

With the machine on?

-----Oorspronkelijk bericht -----
Van: lsf5275@aol.com
Aan: newmellotrongroup@yahoogroups.com
Verzonden: 28-7-08 16:11
Onderwerp: Re: [newmellotrongroup] M400 noise


In a message dated 7/27/2008 3:12:15 P.M. Eastern Daylight Time,
hessel@soundscape.nl writes:

My M400 # 126 has been behaving somewhat strange the last couple of days;

After the warmup ( she still has a CMC 4 card,runs pretty stable ),she'll
play fine,no probs.Sometimes,After the warmup ( she still has a CMC 4 card,runs
pretty stable ),she'll play fine,no probs.Sometimes,<WBR>however,after some
time,there'll be a 'fade out' of direct signal and at the same time a 'fade
in' of noise.The direct sound remains at low le

The machine has been restored recently, a great job,also fixed the headblock
to preamp lead issue,which I believe is one of the possible reasons for the
behaviour mentioned above.

The only thing I can think of is that it maybe has something to do with my
swell pedal,had that refitted with a new pot recently.

Any ideas?

Cheers,H




In all seriousness, you might want to check the PAL connecter that plugs
into the preamp to make sure you the shield and center wire are making proper
contact.



∗∗∗∗∗∗∗∗∗∗∗∗∗∗Get fantasy football with free live scoring. Sign up for
FanHouse Fantasy Football today.
(http://www.fanhouse.com/fantasyaffair?ncid=aolspr00050000000020)