I think the R and C need to be swapped.
Paul S.
----- Original Message -----
From: The Old Crow <oldcrow@...>
To: <motm@egroups.com>
Sent: Tuesday, April 25, 2000 12:32 PM
Subject: Re: [motm] module idea & question
>
> > > Which leads me to my next question, is there any simple way to make a
gate
> > > to trigger pulse convertor? -Nate
>
> > Sure, use a 555 timer as a monostable, set for a 100us output pulse.
>
> Ultracheap method (fits in one end of a patch cord):
>
> gate >---/\/\/---+
> 22K _|_
> ___ 0.01uF
> |
> |
> +--------> trig ___|\___
> _|_
> 1N914 /_\
> |
> _|_
> \_/ (ground)
>
>
> ..at least I think that's how I used to make these. Just some dinky
> step differentiator with a period of about 220 microseconds and a diode to
> keep the return step (gate returning to zero volts) from creating the
> negative differential pulse. __|\__ __
> |/ <-- that thing
>
>
> Nearly as cheap method but needs PIC: program one of the 8-pin PICs to
> output triggers on a few pins for each gate input. Can then do fun stuff
> like an output pin for each rising gate edge, an output pin for each
> falling gate edge (trig on release) and an output pin for trigger on both
> edges. Could even fudge a konb in there to set the trigger pulse width.
>
> Crow
>
> /∗∗/
>
>
> ------------------------------------------------------------------------
> You have a voice mail message waiting for you at iHello.com:
> http://click.egroups.com/1/3555/3/_/529958/_/956684031/
> ------------------------------------------------------------------------
>
>