Archive of the former Yahoo!Groups mailing list: MOTM

I went ahead and ordered a cabinet from nice-racks. Instead of the wood
rails I had him mount standard rack rails which is the same method I
used on the cabinet I built myself. I'd rather be screwing into metal
than wood. I also got rear rails so I can mount the PSU on the back.
Only issues are

1. You can't use the standard MOTM screw since it's 8-32 and rack is 10-32.

2. With the way the rails are bent there's about 1/8 inch gap at the top
and bottom of the module where you see the rails, but the rails are
black as well so I don't think it's very noticeable.

All in all same quality as any of their other racks. There was no
charge for the modifications, but this was kind of a prototype so not
sure if that will always be the case. I know some listers balked at the
price, but if time = money, it's certainly worth it to me.

Dave