Archive of the former Yahoo!Groups mailing list: MOTM

previous by date index next by date
previous in topic topic list  

Subject: Re: [motm] Re: Pitch Shifter

From: Mike Estee <mikest@...>
Date: 2005-01-03

AFAIK there are ∗no∗ analog pitch shifters. It's a very expensive
effect and one that doesn't lend itself to analog circuits too well.
Feel free to prove me wrong though :) As far as a CV controlled pitch
shifter, your best bet is probably the Eventide Eclipse. Its voltages
are a little different, and you can't just plug something straight in
(need funky cable), but it does work. As a word of caution, I've found
that the company has a rather "snotty" attitude and can be a bit
difficult to work with, but they make great effects. (Well, except
there delays, but anyway...)

From the manual:
"Stereo 1/4-inch connectors. The sleeve is ground reference, the ring
is a +5 volt (source),
and the tip is an analog signal between 0 to 5 volts input to the
Eclipse. Connect either foot
switches, foot pedals, or control voltage sources to these inputs to
modulate parameters or
to trigger events"

If you want a frequency shifter I highly recommend the Encore
Electronics MFS01, it's awesome :)

--mikes

On Dec 27, 2004, at 11:45 AM, John Loffink wrote:

> According to the Eventide web site the H910, their first harmonizer,
> is a
> "versatile digital delay line" and harmonizer.  So the pitch shifting
> is
> digital, not analog.
>
> John Loffink
> The Microtonal Synthesis Web Site
> http://www.microtonal-synthesis.com
> The Wavemakers Synthesizer Web Site
> http://www.wavemakers-synth.com
>
>
> > -----Original Message-----
> > From: Sikorsky [mailto:vulture.squadron@...]
> > Sent: Monday, December 27, 2004 1:23 PM
> > To: motm@yahoogroups.com; paulhaneberg
> > Subject: Re: [motm] Re: Pitch Shifter
> >
> >
> > oops
> > i think i got over excited on that last post and didn't read it
> properly,
> > so
> > repeat after me:
> >
> > Eventide H949 Harmonizer
> >
> > you can get them in the uk for around £250, the pitch can either be
> > voltage
> > controlled or clocked via a VCO
> > i've got an H949 and i love it - i'm not too sure what facilities are
> > available on the H910 which is far cheaper on the s/h market
> > as far as i know, the H910 & H949 are analogue pitch shifters
> >
> > cheers
> > paul (ducking this time)
> >
>
>
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
> <122603_LREC_bkup_BR_Ashanti.jpg>
> <l.gif>
>
>
> Yahoo! Groups Links
> •To visit your group on the web, go to:
> http://groups.yahoo.com/group/motm/
>  
> •To unsubscribe from this group, send an email to:
> motm-unsubscribe@yahoogroups.com
>  
> •Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>