> From: JWBarlow@...
> If you get a tube of it, I suggest storing it
> with the cap down since i tried storing it with
> the cap up and found that after a few months
> it separated a bit, such that most of the goop
> went to the bottom of the tube but a very small
> amount of a very slippery film went to the top --
> just about enough to cover the top of a tranny pair
> so when the goop comes out it immediately slides
> off sticking to everything but the tranny pair.
Yep, that stuff does tend to separate. No more than we use on MOTM, you
could get by with one of the small tubes they sell at rat shack. It ain't
big enough to hang around and get old. Since I don't care to torture
myself as John does, I usually squeeze my tube out onto a paper plate or
something until the right mix starts coming out. Then I put it on the
part. If I REALLY want to make myself extra work on my MOTM modules, I
just put some of the chips in backwards like I did on my 410.
Stooge Larry