The MiniWave has got to be the most modded module ever: from Grant to
John to Dave to Larry.
I have one other request for the MiniWave rev. 4. Rather than have
rows of LEDs to drill, how about using 7 segment displays for wave,
bank, and rom? One display for each, using hex notation for waves and
banks: 0,1,2,3,4,5,6,7,8,9,A,b,C,d,E,F.
At 9:52 AM -0500 2003/05/21, J. Larry Hendry wrote:
>A note on the Blacet Miniwave expander. Many of you know Dave Hylander did
>some PCBs for this. They support a 9 additional ROMs (total 10) in the
>Miniwave with a rotary selector switch. You can use these with your
>existing Stooge panel. See Dave's website for MINIwave boards here:
>http://www.hylander.com/miniwave.html
>
>Here are photos of the thumbwheel switch version on an existing Stooge panel
>in case you want to economize and stay with the same panel.
>http://www.hylander.com/miniwavethumbs.html
>
>Here is the photo of Dave's proposed expander panel with a rotary switch for
>ROM selection:
>http://www.hylander.com/images/miniwave/dh-miniwave-expander.jpg
>
>I also have a working prototype PCB that connects to Dave's expander PCB and
>adds voltage control to the PROM selection. It also adds 10 LEDs to show
>which ROM is in use. The control functions use 2 pots and mimics the
>current bank and wave selection. Here is the proposed panel for that panel:
>http://www.wiseguysynth.com/larry/panel/dh-miniwave-vc.jpg
>