John -
The 410 has two built-in LFOs that sweep the three filters. In SINGLE
mode, ONE LFO is used to sweep the three filters together. In DUAL
mode, TWO LFOs are used, the second one being at a slightly different
rate than the first, giving you a more complex sweep. In DUAL mode,
each filter is swept independently, one by the 1st LFO, the second by
the second LFO, and the third by the second LFO inverted. Very cool!
I usually connect all four outputs to my console. The MIX OUT is at
center, the OUT1 is panned hard left, the OUT 2 is center, and the
OUT 3 is panned hard right. Particularly in DUAL mode, this gives
some very nice stereo effects.
If you're not sweeping, something is very probably wrong with the
module.
Mike
--- In motm@y..., Inform3r <inform3r@o...> wrote:
...
> basically I'm wondering if indeed the built in LFOs on the 410 are
supposed
> to sweep in a conventional "swirling" filter type of way.
>
...