Thanks guys! It worked well after a bit of trial and error on the
volume as y'all mentioned!
TJ
--- In korgpolyex@yahoogroups.com, Tim Bieniosek <tab27@d...> wrote:
> I've found it VERY difficult to find the correct volume. It has to
be
> pretty loud, but not too loud. Finding the right spot takes trial
and
> error.
>
> Júlio César wrote:
>
> > Sorry about my english...
> >
> > There are some patch files on the files section, they are in .wav
> > format... Connect the audio out from your soundcard to the tape-in
> > jack on the Poly, turn the "tape" key to "enable", then press load
> > and play the file from your computer... It´s a little difficult to
> > find the correct volume, but when it is ok, poly will blink "good"
on
> > the panel...
> >
> > I´ve done it many times and worked ok...Good Luck
> >
> >
> >
> >
> > --- In korgpolyex@yahoogroups.com, "tjmahan831" <malachi_31@y...>
> > wrote:
> >
> >>Hi
> >>
> >>I just got an excellent condition Poly 800mkII off eBay.
> >
> > Everything
> >
> >>works perfectly on it, and I even got a manual with it.
> >>
> >>Apparently though, the factory preset sounds have been replaced by
> >>whoever owned it previous to me.
> >>
> >>Is there a way to reset those?
> >>
> >>Thanks:)
> >>
> >>TJ
> >
> >