I've found it VERY difficult to find the correct volume. It has to be
pretty loud, but not too loud. Finding the right spot takes trial and
error.
Júlio César wrote:
> Sorry about my english...
>
> There are some patch files on the files section, they are in .wav
> format... Connect the audio out from your soundcard to the tape-in
> jack on the Poly, turn the "tape" key to "enable", then press load
> and play the file from your computer... It´s a little difficult to
> find the correct volume, but when it is ok, poly will blink "good" on
> the panel...
>
> I´ve done it many times and worked ok...Good Luck
>
>
>
>
> --- In korgpolyex@yahoogroups.com, "tjmahan831" <malachi_31@y...>
> wrote:
>
>>Hi
>>
>>I just got an excellent condition Poly 800mkII off eBay.
>
> Everything
>
>>works perfectly on it, and I even got a manual with it.
>>
>>Apparently though, the factory preset sounds have been replaced by
>>whoever owned it previous to me.
>>
>>Is there a way to reset those?
>>
>>Thanks:)
>>
>>TJ
>
>