From memory this question was answered on this list in the history.
When i first joined the list the first task was to go back through the
list and see what existing knowledge was in it, before asking questions
that had already been answered. this took me the best part of two days
part time hehe
The answer you seek IS in the archive, tho i don't recall exactly where.
unfortunately these other pots don't provide useable additional
features, i think one controls the white noise generator i forget what
the other two are for.
Best regards,
Marcus Wilson
On Sunday, April 25, 2004, at 04:30 PM, a7634@... wrote:
> I performed the slayer mod about two years ago and was very pleased
> with the results, but now I want to see if I can get more knobs on
> the korg. I remember when I put the pots in the two parts of the
> board were labelled VR2 & VR5, and there were several other "VR" pots
> around the circuit board. I assume these correspond with other filter
> effects, and was wondering if anyone could tell me which ones would
> allow me to put knob control on the EG, rate, DCO, VCF and delay
> functions of the original poly800. I honestly can't make heads or
> tails out of the zipped schematic of the korg.
> Also, if I were to put knobs on these functions, would I have to
> ground the upgrade and have a resistor again (finding the resistor
> was the hardest part of the slayer mod for me!)
> any info would be great, thanks
> ~AJB
>
>
>
> ------------------------ Yahoo! Groups Sponsor
> ---------------------~-->
> Listen to Internet Radio! Access to your favorite Artists!
> Click to listen to LAUNCHcast now!
> http://us.click.yahoo.com/Zkrq7C/GARHAA/n1hLAA/QnLolB/TM
> ---------------------------------------------------------------------
> ~->
>
>
> Yahoo! Groups Links
>
>
>
>
>