schematic is in the files section.
if you still cant locate a copy let me know
Best Regards,
Marcus Wilson
PS did you check your +5v/-5v rails they should be marked at the board
junctions where appropriate, i remember the joystick in particular
being marked.
On Tuesday, March 23, 2004, at 04:19 AM, jadeappel wrote:
> Tried removing the battery, waiting a while, but still no LEDs, so I
> can't load any patches. Looks like it's toast, but it still produces
> a swishing sound a few cesonds after power up, so maybe only part of
> it is toast.
>
> Anyone know where I can get a schematic? It would be handy to have a
> PDF up in the Files section.
>
> --- In korgpolyex@yahoogroups.com, JB <JB@d...> wrote:
>> You could try removing the battery backup, it may be that the
> poly's
>> memory is corrupted, maybe the backup battery is almost flat, so
> its
>> partly retained its memory.
>> and because the battery is still there, it wont ever clear.
>>
>> By removing all power, you can start it from cold. and it should
> then
>> power up in its default (with no patches) and with leds showing.
>>
>> You can then re-load the factory patches from the .wav's in this
>> group's archive.
>>
>> That might be worth a shot,
>>
>> Best Regards,
>>
>> Marcus Wilson
>> On 09/03/2004, at 11:12 AM, jadeappel wrote:
>
>
>
>
> ------------------------ Yahoo! Groups Sponsor
> ---------------------~-->
> Listen to Internet Radio! Access to your favorite Artists!
> Click to listen to LAUNCHcast now!
> http://us.click.yahoo.com/Zkrq7C/GARHAA/n1hLAA/QnLolB/TM
> ---------------------------------------------------------------------
> ~->
>
>
> Yahoo! Groups Links
>
>
>
>
>