Hi Christian,
I also bought a Poly800 without power supply, so I bought a cheap 500mA one.
It isn't controlled, and I measured a Voltage of 11.5 V if it is switched to
"9V"-position.
So I switched it to "7.5V" and measured inside the Poly if it is decreasing
while power consumption, but it stays at around 9V.
Possibly, with 300mA power supply it would go down to 9V during work, I
don't know.
But anything works great so it's ok.
Olaf
----- Original Message -----
From: <creekree@...>
To: <korgpolyex@yahoogroups.com>
Sent: Monday, October 29, 2001 2:18 AM
Subject: [korgpolyex] power supply question
> i just printed out the manual when one thing caught my attention:
> the poly 800 i bought has ∗naturally∗ no adaptor included ,sigh...
> but i have a 9v 500mA adaptor, will it work? or is it gonna fry the
> synth, since the manual says thas 300mA ones should be used?
>
> by the way, olaf: i saw the pictures of your mods, could you include a
> text file saying what exactly is shown? of course i want to modify my
> poly 800 and any help is greatly appreciated. so where exactly do i
> have to apply my soldering skills? what kind of pots did you use?
> there are quite some posts dealing with this issue, but i find it
> difficult to get all the information together, so if anyone can write
> a brief description on how to install the resonance and q mods, my
> eternal gratitude will be with them....
>
> ok, as i said in my preceding posts: please dont be annoyed by my
> stooopid questions, since you may well have been thousands of times
> through this... but pleeeeeze???
> (he-ho-has-the-stupid-smile-on-his-face will quit now - at last---
> phew!)
>
> thank-u-so-much in advance, christian
>
>
>
>
> To unsubscribe from this group, send an email to:
> korgpolyex-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>