Thank You Very Much! This should help nicely!!
Marcus Wilson <JB@...> wrote:
in the files section of this group site is .wav files of the factory
preset patches for the poly800
by playing these back from your PC using a lead to the tape in on your
korg, you will be able to restore the factory patches
the switch setting for hi-lo is for different volume settings ie line
level vs headphone level. I used max volume on my pc input to the k0rg
switching to tape and load as discussed in the .pdf manual also stored
in this site archive, you can try different volume levels until you get
a result.
it may take some fiddling to get it right
unfortunately my korg tone generator chip is fubar, so all i have is a
midi keyboard, even tho patch loading, and editing all works..
good luck
best regards,
Marcus Wilson
On Thursday, October 16, 2003, at 09:38 PM, mrmusicmom wrote:
> I have not been able to convert those .zip files in the field to the
> left.
>
> Again is there not anyone who would care to share there successes??
>
>
> ------------------------ Yahoo! Groups Sponsor
> ---------------------~-->
> Buy Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark
> Printer at MyInks.com. Free s/h on orders $50 or more to the US &
> Canada.
> http://www.c1tracking.com/l.asp?cid=5511
> http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/QnLolB/TM
> ---------------------------------------------------------------------
> ~->
>
> To unsubscribe from this group, send an email to:
> korgpolyex-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
To unsubscribe from this group, send an email to:
korgpolyex-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.