Archive of the former Yahoo!Groups mailing list: Korg Poly800/EX800 Users

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [korgpolyex] Re: Install issues and possible further queries

From: support <support@...>
Date: 2019-04-26

yes, there are trimmers. You can download the schematics from the files section.

However, if you have not touched them then there should not be any need to adjust them.

Did you check that the AtomaHawk board was not contacting the caps that are underneath? That is a definite possibility.

You also should double triple check the wiring of the AtomaHawk to the main board. Those wires are easy to connect wrong, swapped or even a single strand shorting a connection.

/Mike

On Thu, 2019-04-25 at 13:49 -0700, pizzicato2007@... [korgpolyex] wrote:
 

New query- what parts of the board are controlling cutoff and resonance? maybe that is part of the problem? Are there trimmers I may need to reset before reinstalling? Apologies in advance for reviving this dead thread once again.