Archive of the former Yahoo!Groups mailing list: Korg Poly800/EX800 Users

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [korgpolyex] Distorted Output

From: Michael Hawkins <korgpolyex800@...>
Date: 2018-03-09

On the AtomaHawk board, check to see if the resistor R2 is a 4K7 ohm and NOT a 1K ohm.

I sent out instructions to everybody explaining that the resistor needed to be 4K7. If it was installed with a 1K ohm, that could be the root of the issue.

/Mike


From: "bperkins211@... [korgpolyex]" <korgpolyex@yahoogroups.com>
To: korgpolyex@yahoogroups.com
Sent: Friday, March 2, 2018 9:15 PM
Subject: Re: [korgpolyex] Distorted Output

 
Hi Mike,

I think I got the one out of the first batch of SMT Atomahawk boards you made.
Odd you mentioned it..  I sometimes wondered if there were settings for the Atomahawk board that was causing the distortion.
Tweaking that pot down helped alot though.


The version I am running is the latest, v2.65l

/Blaine