Hi, yes, you need to cut off input from LFO to lead 7 of MN3102. Then you can control "delay" time with knob between leads 6>7 + capacitor between 5>7. You can see it on my old drawing under group files "Cross Modulation mod" .
By the name "cross modulation" i was not meaning classic cross-osc, but something as semi-modular use of available signals (chorus LFO...)
It is a pitty I have no records from my >time ago-ed< experiments - just one record of chorus feedback ... :
https://xa.yimg.com/df/korgpolyex/Poly800+-+Matrix.jpg?token=iqmfh2coqUuJ9e8iR0sVDdZMG08gEr4ne1aZ5d3vfxnu4g7hhgAvx4dYflbZCk0iRKL-OpPsmnVxA2HFpZvaoWR_6q_559U1Gs9T88e4s4KA9KgbmkxuPc0KTJOKZev-QRNayyWQQZcY65oRjs2v9Wrwzn_tJjZWNxWamCvtWYwzwqU6Ml5EUqlnSIoD-f17lVwlr-Nr&type=download
---In korgpolyex@yahoogroups.com, <ashdot@...> wrote :
![\"image\"](\"https://xa.yimg.com/df/korgpolyex/Poly800+-+Matrix.jpg?token=iqmfh2coqUuJ9e8iR0sVDdZMG08gEr4ne1aZ5d3vfxnu4g7hhgAvx4dYflbZCk0iRKL-OpPsmnVxA2HFpZvaoWR_6q_559U1Gs9T88e4s4KA9KgbmkxuPc0KTJOKZev-QRNayyWQQZcY65oRjs2v9Wrwzn_tJjZWNxWamCvtWYwzwqU6Ml5EUqlnSIoD-f17lVwlr-Nr&type=download\")
---In korgpolyex@yahoogroups.com, <ashdot@...> wrote :
Hi,
I think I found the way to control the delay time of the EX800 chorus.
I removed resistors R67 & R68 and replaced them with a potentiometer wired as a voltage divider between D+ and D-.
My scope shows that the pot changes the frequency of the voltage going into the MN3012 clock.
I placed a 10K resistor between D+ and the pot, as any resistance below about 10K stalls the chorus.
Izhar