Archive of the former Yahoo!Groups mailing list: Korg Poly800/EX800 Users

Look at your X Station Manual, Page 19.

the part about NRPN setup of your controls..

now look at the HAWK 800 MIDI Implementation Chart
CC 98 and 99
read what it say's

go back to the X station manual and again read up how to setup the NRPNs

set the MSB to 1 or 0, depending on whatever Global Param. 16 is on your HAWK.
set LSB to 0-127.. see the Parameter Quick Reference Chart and use the number in the CC column next to the Parameter you want to change.

be sure you have your control set to MIDI channel 1 or whatever channel your HAWK is set to.

once you get the hang of it, you'll figure out how to map all your controls on the X to the HAWK.