Archive of the former Yahoo!Groups mailing list: Korg Poly800/EX800 Users
Subject: Poly 800 Takes a while on start to get to tune
From: borislav.wurst@...
Date: 2015-02-27
hi
My poly 800 Takes about 10 seconds until you Hear anything. Then the tune goes Up until it nearly stabilize But it still changes it tune...
I checked all the voltages and they Seem right.
Even exchanged the coil but still the same problem.
If i Touch a capacitor around the coil it changes tune down some halftones.
And it is not stable in tune. It goes Up very slowly when it reaches the normal tune.
And the Joystick doesnt Seem to work too. As when i try to pitch bend it very slowly changes the pitch and vcf and dco Modulation doesnt work at all.
I tried it With the Joystick not Connected But still the same Problem with the tune!
Batteries are Full and the powersupply works Fine.
Any suggestions?
I will try changing the capacitors
Thanks very much
Alex