From: Michael Hawkins <korgpolyex800@...> Date: 2014-09-30
Tim,
If you have the HAWK installed you will need to make sure that the bend parameter P2 85 is set high. Maximum bend depth is 63. No bend = 0.
/Mike
On Monday, September 29, 2014 4:27 PM, "Malte Rogacki gacki@... [korgpolyex]" <korgpolyex@yahoogroups.com> wrote:
Hi;
if I recall correctly KLM601 or KLM601a are responsible for setting the bend range in either direction. If there's a failure on this board one bend direction will be missing.