Archive of the former Yahoo!Groups mailing list: Korg Poly800/EX800 Users

previous by date index next by date
previous in topic topic list  

Subject: Re: [korgpolyex] Poly800 Resonance dependent on parameter value.

From: <backshall1@...>
Date: 2014-04-20

Yes, this is correct. If the resonance parameter is set to 0 then the knob can’t to anything. It just controls resonance from 0 up to the parameter value. Of course, the max value will now cause much higher resonance than was previously possible, so you probably want to keep it below 15, maybe 13 max.
Don Backshall
 
Sent: Saturday, April 19, 2014 6:43 PM
Subject: [korgpolyex] Poly800 Resonance dependent on parameter value.
 
 

Hey everyone,

 
First post here. I've got my filter mod someone complete but am running into the issue of the resonance still depending on the parameter value. Is this correct? Doesn't seem it should be since the Cutoff isn't like that.
 
Thanks in advance!
 
-Karl