I've been using a 1 amp 9v adapter without any problems for quite some time
now, so the internal regulator is probly fairly lenient on what voltage it's
given. I'd bet anything with an output marked as '9v' will work assuming it
can source enough current.
On Tue, Mar 25, 2003 at 10:04:23PM +0100, OlGu wrote:
> You can use any universal power supply that comes with different voltages and connector adaptors.
> But it should have 300-500mA max., because it delivers higher voltages if the power consumption is too low.
> (I use "7.5V" switch position with 500mA power supply and measure about 9V while working with my Poly800)
>
> And be sure to use the right polarity.
>
> Olaf