| previous by date | index | next by date |
| previous in topic | topic list | next in topic |
I’ve been using 300ma for years. Noproblem. The only thing that is really critical is that it has to have thecenter pin NEGATIVE. This is backwards from most AC adapters, but fairly normalfor a lot of Korg and Roland products. The size is hard to measure but Ibelieve it is a standard 5.5mm outside, 2.5mm inside diameter.
Don B.
From: korgpolyex@yahoogroups.com [mailto: korgpolyex@yahoogroups.com ] On Behalf Of bodhi_light
Sent: Thursday, October 04, 20128:38 PM
To: korgpolyex@yahoogroups.com
Subject: [korgpolyex] Re: NewPower Adaptor for Poly 800 and question about multi mods (Hawk)
So 300ma is good? I saw 800 there as well. Also theadapters at radio shack have adjustable tips. Which on do I need? I'd prefernot to schlep the Korg there. Thanks again. This is a helpful group!
--- In korgpolyex@yahoogroups.com,"bimmerfan222" <bperkins211@...> wrote: >
without any problems.
>
>
>
> I've been using a radio Shack 300mA supply on my korg for the last year > But I would agree that having at least 500mA would be preferrable.
may have to invest in one and upgrade mine.
>
> there are 1A 9v adapters on ebay everyday for about 5 dollars shipped... I >
Michael Hawkins <korgpolyex800@> wrote:
>
> - Blaine
>
>
>
> --- In korgpolyex@yahoogroups.com, > >
is really the right size for it.
> > Holy moly! My bad, I meant to say 600mA. But you're right that 1Amp > >
about multi mods (Hawk)
> > Mike
> >
> >
> >
> > ________________________________
> > From: Gordon JC Pearce <gordon@>
> > To: korgpolyex@yahoogroups.com
> > Sent: Tuesday, October 2, 2012 1:05 PM
> > Subject: Re: [korgpolyex] New Power Adaptor for Poly 800 and question > >
some
> >
> > Â
> > On 02/10/12 13:48, Michael Hawkins wrote:
> > >
> > >
> > > You will need a 9V DC 300mA power adapter.
> >
> > 300mA doesn't really sound like enough; mine draws a good 650mA when
> > it's running. The PSU that came with it is rated at 1A, but failed > > time ago. I now use it with a 1.5A PSU because that was what I had
> > kicking about ;-)
> >
> > --
> > Gordon JC Pearce MM0YEQ
> >
>