Thanks for your reply, Mike. I get b 1.95 for the Boot Code, now I'll try and get some patches in.
--- In korgpolyex@yahoogroups.com, Michael Hawkins <korgpolyex800@...> wrote:
>
> You are doing just fine. I have not updated the documentation but function 6 in diagnostics mode (now called "Tools" mode) doesn't work anymore because I had to remove the default patches out of the boot ROM to make way for more software. So I would say that your kit is probably working just fine.
>
> You do ∗not∗ need to update the boot code because you have the latest code already. You can check that by holding down the "Bank Hold" button while powering up the synth. Keep holding it down and you will see that "b 1.96" shows up briefly followed by other boot up check messages. If you don't get "b 1.96" I would be very surprised indeed because the fact that your synth boots up means it is most likely running the right boot version right now. But go ahead and check.
>
>
> If you send the boot code to the HAWK then you just need to send the EEPROM0 back into your synth while in flash mode.
>
> Use Tools mode function 8 to upload patch banks that are on the sourceforge site. I think you will find them to be very good starting patches for your own new ones.
>
> http://sourceforge.net/projects/hawk800/files/Patch%20Library/
>
>
> Mike
>
>
>
> ________________________________
> From: dpaulo2 <dpaulo@...>
> To: korgpolyex@yahoogroups.com
> Sent: Thursday, July 26, 2012 3:14 PM
> Subject: [korgpolyex] snag with Hawk800
>
>
> Â
> Hi Mike,
> Got my Hawk800 in the kit a few days back and gave it to my partner's son who is much better at soldering that I am. So, firstly I believe the kit is installed properly and good.
>
> I have had difficulty getting the Boot software in. If I install the 3 that are written in lowercase (ie eeprom0) then the synth gets stuck on 'FLASH'. However if I install the three uppercase files (ie EEPROM0) then I seem to get to a working synth, but when I go into the Diagnostic Tools to try function 6 to install a Patch Set the 6 key doesn't work and nothing happens, the other diagnostic functions do seem to work. I haven't really tried to to much else as this function would be a good starting point.
>
> I have to say that stupidly in the earlier phase of trying to get the eeprom files in I also installed the 'Boot' file into Flash 3 which resulted in 'Good 4'. Have I messed things up by doing this??
>
> Thanks Mike,
> Daniel
>