Hi Gordon, thanks for the reply.
Surely there is a way to slip in a rotary encoder to mimic a up\down value keys..
I was thinking of using this decoder by elmelectronics.com
http://elmelectronics.com/DSheets/ELM402DS.pdfcouldnt the outputs be placed in parallel with the value switches?
It can be set to generate 2.0msec pulses on two channels
--- In korgpolyex@yahoogroups.com, Gordon JC Pearc e <gordon@...> wrote:
>
> On 08/04/12 16:09, bimmerfan222 wrote:
>
> > I've yet to see an 800 with this simple, yet very helpful mod and am a little dumbfounded that it has not yet been done.
> > Debouncing is key to getting a smooth signal out to the triggers, otherwise you'd end up getting wild jumps in up/down values when moving the knob slow or fast.
>
> No, you won't.
>
> You'll get a rotary encoder that has to be turned painfully slowly to
> avoid it missing steps. The buttons are already debounced, and have
> quite a long debounce time.
>
> --
> Gordonjcp MM0YEQ
>