On Sat, 03 Dec 2011 22:54:42 -0000
"Gary" <
chunkybeefpies@...> wrote:
> Does anyone know where to get an ac adaptor for the poly 800 or alternatively a generic adaptor that would suit?
>
IIRC Roland/Boss ones will work. It must have negative to the centre pin and put out around 9V at a minimum of 800mA - use a PSU that can deliver at least 1A for best results. I used to use a 9V 1.5A ZX Spectrum PSU for a long time. Now I use a custom-built 9V 8A PSU driving all my 9V gear through a small distribution box.
The switchable voltage ones are pretty much a waste of time, unless they're the quite expensive high quality ones.
--
Gordon JC Pearce MM0YEQ <
gordonjcp@...>