Archive of the former Yahoo!Groups mailing list: Korg Poly800/EX800 Users

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [korgpolyex] loading data onto keyboard

From: Martin Ator <cyllall@...>
Date: 2011-10-21

Yeah, silly me. R96 is the tape out from the Korg. It will give a stronger signal when you want to save your patches to tape.
From: Michael Hawkins <korgpolyex800@...>
To: "korgpolyex@yahoogroups.com" <korgpolyex@yahoogroups.com>
Sent: Friday, 21 October 2011, 17:23
Subject: Re: [korgpolyex] loading data onto keyboard

 
I've always used my computer line out and didn't have to change R96 either.

From: Martin Ator <cyllall@...>
To: "korgpolyex@yahoogroups.com" <korgpolyex@yahoogroups.com>
Sent: Friday, October 21, 2011 9:41 AM
Subject: Re: [korgpolyex] loading data onto keyboard

 
Are you actually using a tape recorder? You will need to use the tape out socket. Playing it out through a headphone socket or line out will not be strong enough probably.
Change Resistor R96 inside the Poly-800 to 4.7K. It will take some finding on the schematic. Then you can play from a computer or most modern playback methods then.


Martin


From: Gary <chunkybeefpies@...>
To: korgpolyex@yahoogroups.com
Sent: Friday, 21 October 2011, 13:48
Subject: [korgpolyex] loading data onto keyboard

 
Can soomeone please give me some advice on loading data from tape recorder to keyboard. encountering error many times - adjusted volume a thousand times,tried high and low switch at back of korg. Any tips? Thanks for letting me join this prestigous group of korg poly 800 owners.

Gary