The noise level is VR3, you have to swap the wiring from left to right
or the pot will reverse the noise level, 0 pos = 100 and 100 pos = 0.
I've never tried to mix the noise gen with external audio but I do
believe it will be a better choice if you send another noise source
mixed with the audio before it hits the synth, if you want the exact
noise source from the poly just record it and play it back together with
any other audio material. If you wire both signals at the same time you
can run into problems like signal loss, distortion or even fry the transistors
of the noise generator. Remeber that making mods do take trial and error
to have it fine tuned to your taste so take care and try not to do anything
that can't be undone, also take it easy with resonance when you get the
moog slayer mod done, it can easily fry your speakers or blow your ears.
Em 18/07/2011 18:32,
7yash < josh.nursing@... > escreveu:
Thanks Bill, I am ready to try that and also the 12/24 Db Filter mod. Then, I'll also do the Moog Slayer and FM-800 mods. Much Fun.
How would one wire the Noise Level Mod? Is that a simple trim pot replacement too?
Also, what if instead of toggling the noise vs External input, one would like to mix the noise with the External Input?