Archive of the former Yahoo!Groups mailing list: Korg Poly800/EX800 Users

previous by date index next by date
previous in topic topic list  

Subject: Re: [korgpolyex] P1 14 parameter values 12 and 13

From: Michael Hawkins <korgpolyex800@...>
Date: 2010-11-24

Tim,

12 and 13 correspond to EG3 and inverted EG3.

It's not documented because I haven't finished the code yet although they both work.

You will notice that there are other parameters where you can select the LFO waveform and also have 12 and 13 available.

So you can modulate those features using EG3 instead of an LFO.

Enjoy!

Mike

From: tim.tashpulatov <tim.tashpulatov@...>
To: korgpolyex@yahoogroups.com
Sent: Mon, November 22, 2010 4:27:42 PM
Subject: [korgpolyex] P1 14 parameter values 12 and 13

 

Hello all,

Now that I've assembled and installed the HAWK-800 kit, I am learing my renewed Poly-800.

When playing with P1 14 parameter (DCO harmonics modulation waveform selector) I can see there are two values, 12 and 13, not covered in the manual. I guess the manual is slightly out of sync with the latest firmware 2.4.6. What are these values?

The manual also says P1 45 can be 0-1, while it in fact can be 1-2, this must be just a typo.

Once again Mike, thanks a lot for the awesome work you have done with HAWK-800 and accompanying documentation.

Regards
Tim