Archive of the former Yahoo!Groups mailing list: Korg Poly800/EX800 Users

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [korgpolyex] Filter slope

From: Michael Hawkins <korgpolyex800@...>
Date: 2010-09-17

I am guessing that you're talking about the filter mod picture in the files section showing the spdt switch in the upper left.

If that is the case, then I would say that this is the standard hackers way in which the 12/24 db slope mod is done.

The moog slayer mod is more about variable control of the VCF cutoff and extreme resonance.

So I am not really sure what you mean by the comparison.

Mike


From: pnemusic <pnemusic@...>
To: korgpolyex@yahoogroups.com
Sent: Fri, September 17, 2010 12:18:51 PM
Subject: [korgpolyex] Filter slope

 

First, I want to say thanks for putting this group together as well as developing AtomaHawk! Which I WILL be getting asap! For now I am gonna do what I can with the standard parts I have here.

My question is concerning the 12/24db per octave slope switch. I want to know if there are actually multiple contact points for switching the slope with and without the moogslayer mod. I notice some folks have 2 switches one for with the other mod and one for without. Will the design depicted here

http://f1.grp.yahoofs.com/v1/gJCTTPYRINb3l_A-eHauvy9tr61g_x7UKqJVkEdzniGDbYV8IyezkjJGXeueAoiyqTEk2KVqFrYZJX8vh8CDg0VRFPzqdA/4%29%20Modifications/24db%20filter%20mod/12-24%20dB.jpg

...work in either case or only one and if so which one?

Thanks for the help!

Joe