Archive of the former Yahoo!Groups mailing list: Korg Poly800/EX800 Users

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [korgpolyex] tune/pitch bend problems

From: Michael Hawkins <korgpolyex800@...>
Date: 2010-06-17

I would start by checking that all of the cables that go from the tuning board and the joystick board are all plugged in and working correctly.

I would also check the power supply rails (both +5V and -5V).

Then I would check that the ground is OK on those boards too.

Mike

From: David Mochen <davidmochen@...>
To: korgpolyex@yahoogroups.com
Sent: Thu, June 17, 2010 10:44:03 AM
Subject: Re: [korgpolyex] tune/pitch bend problems

 

Hello Poly fans, me again, trying to revive my post. Any suggestionfrom all you gurus regarding the problem exhibited by my Poly? I hopeit is not such a strange or difficult condition to fix...

Please let me know if the video is clear enough or if more informationis needed.

Thanks very much,

David

On 13/06/2010 14:03, davidmochen2 wrote:

 

Hi group, it's been a while,

I have a problem with my Poly. After not using for a couple of monthsor so, I found out it developed a very weird tune-pitch bend problem.In a nutshell, tune slider seems not to be able to fine tune the Polybut rather it covers almost a whole octave (the default full pitch bendrange for the Poly, as if holding down a note with joystick fully tothe left and then moving it all the way to the right).

I am troubled since I do have the intention to go install the Hawkmods, but certainly not before having fixed this.

I posted a video in You Tube depicting the problem: http://www.youtube. com/watch? v=JSOtu4YxUCs.

Any and all help to bring my Poly back to normality will be greatlyappreciated.

Thanks in advance,

Dave