Mike,
Thank you for clarification. Does it mean that upon installing HAWK800 upgrade one no longer could use Moog Slayer mod?
--- In korgpolyex@yahoogroups.com, Michael Hawkins <korgpolyex800@...> wrote:
>
> Tim,
>
> The HAWK-800 and AtomaHawk kits combined control Moog Slayer (which is really just extreme resonance).
>
> But no, the Moog Slayer pots do not need to be three wire.
>
> Mike
>
>
>
>
> ________________________________
> From: tim.tashpulatov <tim.tashpulatov@...>
> To: korgpolyex@yahoogroups.com
> Sent: Thu, April 8, 2010 5:16:32 AM
> Subject: [korgpolyex] Moog Slayer pots question
>
>
> Hi all,
>
> I wonder if the two pots for the Moog Slayer mod should really be of 3-pin type.
>
> My point is that I've got a digital resistor chip from AD, and it features two channels (or 'digital pots'). One has 3 pins, and the other is 2-pin only. The idea was to use this chip to control the Moog Slayer parameters programmatically.
>
> Thanks!
>