Archive of the former Yahoo!Groups mailing list: Korg Poly800/EX800 Users

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [korgpolyex] Re: HAWK-800 front panel decal

From: Michael Hawkins <korgpolyex800@...>
Date: 2010-04-05

I downloaded a seven segment font set from here: http://www.twyman.org.uk/Fonts/

I created the decal in OpenOffice Draw version 3.1. Everything looks fine with the decal in Draw.

When I export it to PDF, somehow the font is getting its alignment messed up.

I am going to send the Draw doc and the PDF to the guy who put the font together and see if he can come up with a reason why and maybe a fix.

Meantime, I've attached the Draw document so that people can print it out for themselves.

I got very frustrated trying to remember the harmonics combinations and the different LFO waveforms. And I am surprised no one had asked me what the extra two values (12 and 13) are in the LFO waveform parameters. Those are for routing EG3 or EG3 inverted to the particular chosen modifier. Basically, you can route EG3 to any of the modulators instead of LFO waveforms. I look forward to hearing some patches from ppl that use this cool undocumented feature.

Anyway, I just had to improve the accessibility of the different parameters so the decal came into being.

See attached and enjoy!

Mike.
 



From: narfman96 <narfman96@...>
To: korgpolyex@yahoogroups.com
Sent: Mon, April 5, 2010 9:04:04 AM
Subject: [korgpolyex] Re: HAWK-800 front panel decal

 

Mike,
This is way better than hunting and pecking in the manual. A pdf is cool, a mylar is even cooler. I told you I was thinking of doing this to help with writing patches. This is much nicer than anything I could have dreamed up. Did you do the graphics? I realize the font didn't translate for crap, but hey it is what it is. Nice job!!!
Fran

--- In korgpolyex@yahoogro ups.com, Michael Hawkins <korgpolyex800@ ...> wrote:
>
> Hi HAWK-800 fans,
>
> I find that I get rather confused with some of the parameters and their
> options so I have been working on a new front panel decal to replace the original.
>
> I've attached it as a PDF.
>
> If I get enough people interested in having it made up as a real mylar sticker then I may go ahead and make some.
>
> Or, it might look quite OK printed out on a color printer.
>
> I would appreciate feedback from you all.
>
> Please note that the parameter numbers have not come out correctly and I will have to fix that first but you get the general idea.
>
> Mike
>