I'm sorry, I wonted to ask for Program DOWN button.
Thank you
--- In korgpolyex@yahoogroups.com, Michael Hawkins <korgpolyex800@...> wrote:
>
> The pedal socket on the Poly-800 already works as a program up feature. So I don't understand what you're asking for?
>
> No, the pitch bend range won't go that far. Not without redoing the entire pitch bend and master oscillator circuit. I am not aware of anyone having done that.
>
> Mike
>
>
>
>
> ________________________________
> From: x <pantvrdej@...>
> To: korgpolyex@yahoogroups.com
> Sent: Thu, February 18, 2010 10:12:47 AM
> Subject: [korgpolyex] Re: Hold pedal?Up program buton?
>
>
> Ok. Thank you for your answer.
> And what about program up button? is there chance to add it?
>
> and another question, I didn't find answer in older messages:
>
> How can I change pitch bender range (joystick pitch) to Whole Octave?
> Is it Possible?
>
> Thank you
> ryba
>
> --- In korgpolyex@yahoogro ups.com, Michael Hawkins <korgpolyex800@ ...> wrote:
> >
> > It's the Poly 800 software that is cutting the notes off when you switch from one mode to another.
> >
> > There's nothing you can do to the hardware to stop that.
> >
> > The HAWK-800 sustain pedal feature is one of those things that significantly improves the usefulness of the Poly-800.
> >
> > Mike
> >
> >
> >
> >
> > ____________ _________ _________ __
> > From: x <pantvrdej@ ..>
> > To: korgpolyex@yahoogro ups.com
> > Sent: Wed, February 17, 2010 2:28:57 AM
> > Subject: [korgpolyex] Re: Hold pedal?Up program buton?
> >
> >
> > Yes, that would be a solution,
> > but when I push hold button,it stops all sound (there is a difference between My Poly 800 and Poly 61).
> > So, is there a chance to cut some diode to make note still playing with switching between poly and hold modes? or something else?
> > Or is mistake only in my own poly800, that it stops sound by switching modes?
> >
> > I'm asking for solution without hawk800.
> > Thank you
> >
> > pantvrdej
> >
> > --- In korgpolyex@yahoogro ups.com, Michael Hawkins <korgpolyex800@ ...> wrote:
> > >
> > > The HAWK800 does full sustain mode with parameters for changing the decay and release according to each patch and user preference.
> > >
> > > You could probably put an extra 1/4 inch jack into your Poly and wire it to the hold button but I think that would be a very poor solution.
> > >
> > > I recommend the HAWK800. :-)
> > >
> > > Mike.
> > >
> > >
> > >
> > >
> > >
> > > ____________ _________ _________ __
> > > From: x <pantvrdej@ ..>
> > > To: korgpolyex@yahoogro ups.com
> > > Sent: Mon, February 15, 2010 1:44:34 PM
> > > Subject: [korgpolyex] Hold pedal?Up program buton?
> > >
> > >
> > > Hallo to you all.
> > >
> > > I'm new on this group, so I'd like to say hallo to all and thanx for all files and schematics here.
> > >
> > > I'd like to ask about something I didn't find In older messages (or didn't find answers):
> > > 1.
> > > Is there a chance to add some Hold pedal, or is it unreal(I think,there is no analog ADSR? or is it?)? I'm using hold pedal on my Poly61 and it makes great work, I'm missing it on my Poly800.
> > > 2.
> > > Is there a chance to add program UP button/switch/ pedal?
> > >
> > > I think can I do both mods without hawk800?
> > >
> > > thank you, sorry for my english.
> > >
> > > ryba (pantvrdej)
> > >
> >
>