Yes, that would be a solution,
but when I push hold button,it stops all sound (there is a difference between My Poly 800 and Poly 61).
So, is there a chance to cut some diode to make note still playing with switching between poly and hold modes? or something else?
Or is mistake only in my own poly800, that it stops sound by switching modes?
I'm asking for solution without hawk800.
Thank you
pantvrdej
--- In korgpolyex@yahoogroups.com, Michael Hawkins <korgpolyex800@...> wrote:
>
> The HAWK800 does full sustain mode with parameters for changing the decay and release according to each patch and user preference.
>
> You could probably put an extra 1/4 inch jack into your Poly and wire it to the hold button but I think that would be a very poor solution.
>
> I recommend the HAWK800. :-)
>
> Mike.
>
>
>
>
>
> ________________________________
> From: x <pantvrdej@...>
> To: korgpolyex@yahoogroups.com
> Sent: Mon, February 15, 2010 1:44:34 PM
> Subject: [korgpolyex] Hold pedal?Up program buton?
>
>
> Hallo to you all.
>
> I'm new on this group, so I'd like to say hallo to all and thanx for all files and schematics here.
>
> I'd like to ask about something I didn't find In older messages (or didn't find answers):
> 1.
> Is there a chance to add some Hold pedal, or is it unreal(I think,there is no analog ADSR? or is it?)? I'm using hold pedal on my Poly61 and it makes great work, I'm missing it on my Poly800.
> 2.
> Is there a chance to add program UP button/switch/ pedal?
>
> I think can I do both mods without hawk800?
>
> thank you, sorry for my english.
>
> ryba (pantvrdej)
>