Archive of the former Yahoo!Groups mailing list: Korg Poly800/EX800 Users

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [korgpolyex] Re: Hawk 800 Mod issues

From: Michael Hawkins <korgpolyex800@...>
Date: 2009-09-30

Are you able to confirm that the Poly-800 worked just fine before the HAWK-800 was installed?

Did you do the HAWK-800 install yourself?

Mike


From: indyisking <indyisking@...>
To: korgpolyex@yahoogroups.com
Sent: Tuesday, September 29, 2009 3:44:38 PM
Subject: [korgpolyex] Re: Hawk 800 Mod issues

 

I pulled, checked, and reset CN3, CN4, and CN5. All were in the correct places and seemed to be set completely and correctly. With CN3 pulled the programming buttons do not function and do not play notes and the said keys work. With CN5 pulled (and CN3 set) the keys do not function and the programming buttons work but also produce notes. Watching the midi signals received when the functioning keys are pressed send two different notes and once. The programming buttons send only one note. Keys below the working keys transmit no midi on/off data.

-Tom