Archive of the former Yahoo!Groups mailing list: Korg Poly800/EX800 Users

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [korgpolyex] poly 800 won't hold program

From: Michael Hawkins <korgpolyex800@...>
Date: 2009-09-11

If you have five C batteries in the Poly-800, then the patches should stay.

But, there is also a location on the main printed circuit board for installation of a lithium battery.

On some early main boards, there are no pads for the battery to install onto. But most boards do have the pads.

They're right smack in the middle of the main board. Check to see if there's a lithium battery soldered in there.

Mike.

From: e_flat4me <e_flat4me@...>
To: korgpolyex@yahoogroups.com
Sent: Friday, September 11, 2009 9:34:31 AM
Subject: [korgpolyex] poly 800 won't hold program

 

is there a reason that my old poly-800 won't hold it's program.
it works fine, but, turn it off and everything is gone.
is there something hiding inside to look for.

thanx,

andy