| previous by date | index | next by date |
| previous in topic | topic list |
----- Original Message -----From: alyerpalSent: Friday, April 25, 2008 6:34 PMSubject: [korgpolyex] Correct components & wiring for Moog Slayer mod?Hi all,
I just picked up a Poly-800 for $100 that already seems to have the mod done - there are
two (knobless) pots above the joystick that seem to control res & cutoff. They're both really
sticky and tough to turn, so I'm gonna open 'er up this weekend & use some de-oxit.
While I've got the hood open I'd like to do two things:
1) Make sure the job was done correctly, and..
2) Add the "patch values vs. knobs" switch.
Regarding point #1 above, I've checked out Olaf's photos and have a few Qs:
There are two diagrams, called schematic & MoogSlayer. They show different wiring in each
& different values for the RES pot (50k vs. 10k). Which is correct?
Regarding point #2, I'm not sure what value resistors to use here, since I bought the synth
with the mod already done, hence no VR2 & VR5 to check. Any suggestions?
Thanks in advance for any help.
-Alex-